SHOWER NEW

SHOWER CLEANER & PROTECTOR
Use Shower New to eliminate soap scum, hard water and mineral build up on you shower glass, and ceramic/porcelain tile surfaces.

Once clean, this amazing product leaves behind an invisible coating that will strongly resist the build up of these hard to clean contaminants in the future. Say goodbye to endless scrubbing and toiling to keep your showers looking fresh and clean.

Directions For Use: Adjust nozzle setting to spray. Spray 6 to 8 inches from surface. Spray Shower New directly on to glass. Adjust nozzle setting to spray. Spray 6 to 8 inches from surface. Spray Shower New directly on to glass and squeegee off, working from top to bottom. If using a microfiber towel, “wipe into” glass and tile surfaces evenly until dry. For heavier soiling, clean first with Xtacular and rinse with water. Towel dry surfaces before applying Shower New. Shower New is designed to slowly remove soap scum, and mineral build up. For very neglected surfaces, it may take anywhere from two to three weeks to completely remove these stubborn deposits. Not for use on natural stone surfaces. Use gloves when applying. Ensure proper ventilation during process. Always test in an inconspicuous area to determine effectiveness prior to use. Do not dilute.

Data Sheet
SDS