Tech Seal

Tech Seal - Premium Penetrating SealerTECH SEAL
A solvent-based sealer formulated to provide maximum protection and excellent oil and water repellency with very low odor.

Modern Stone’s Tech Seal is a premium low odor, solvent based, natural look sealer formulated to provide maximum stain protection and excellent oil and water repellency to a variety of substrates with little or no change in appearance. It allows for moisture vapor transmission and may also be used as a pre-grouting sealer. Greatly reduces cleaning maintenance.

Use on marble, granite, limestone, travertine, concrete/masonry, saltillo tile, clay tile, stucco, terrazzo, and grout. Test in an inconspicuous area and allow 24 hours to cure to determine ease of application and desired results.

COVERAGE CHART: Approximate square foot coverages for the typical job, per gallon.
Travertine: 1500
Limestone: 1500
Marble: 1500
Granite: 1500
Slate: 900
Quartzite: 1000
Sandstone: 500
Flagstone: 500
Terra Cotta: 600
Saltillo Tile: 600
Grout: 2000
Brick/Masonry: 500
Concrete: 500
*Two coats are assumed for substrates were two coats are typical, and are factored in. As with any job dealing with natural stone varied results can be expected.